Today everyone was in class. We soldered our Raspberry pie wires to our other battery pack. After the soldering we worked on 3D printing a iPhone holder to hook on the side of our box. We decided on keeping  the battery packs instead of using a electric wire. We might have 2-3 iPhone holders that we will 3D print that can ether charge, or enhance music sound coming from the phone. Our next goal will be to program our conversation pieces on the raspberry pie. We also decide that we will use a touch screen instead of the LED screen we have currently. In 3 hours our first iPhone holder will be printed. We also will create a new box out of the laser cutter soon and add some designed on the sides. We also need to 3D print holders for the raspberry pie and battery packs. We talked about making the box acrylic with a color pice on the inside so it glows when its working. We would need 6 pieces of acrylic with translucent colored pieces. On Friday we will look at colored acrylic pieces online. 

 

Notes:

Keep film on when laser cutting

Amazon has colored acrylic pieces. 

Make colored pieces smaller than clear pieces

Charging dock might not work by the end of the demo

Lowes will cut big acrylic pieces for us 12in by 12in 

Laser cutter is 3 feet by 2 feet 

Today our group again worked on laser cutting the box. We had more trouble working with Rhino and that problem took up the majority of our class today. We had to find a larger piece of cardboard in order to laser cut our design. We have set some goals for next class. Dr. Kloth gave us some ideas about using the 3D printer to put our battery pack and Raseberry Pie in. 

Today in class Anna and I worked on creating a new cardboard box with Rhino. It took us a few times to create  the measurements small enough to fit in the laser cutter. Finally we made the dimensions of each side of the boxes, 18.3 cm. Next class we will laser cut the card board and fold and glue the sides. The screen is still powered up by the batteries and next class we will also work on connecting the raspberry pie to the screen. We had a lot of trouble finding the right measurements. 

Todays class Nellda and I got a lot of work done with the circuits and LED screen. It was really awesome to see the batteries charge the LED screen to power it. We hooked up the raspberry to screen and batteries and we saw the screen light up and show some programs that the raspberry computer already had on it. Our next step is to laser cut the box to fit the screen inside. We started working with the laser cutter but ran out of time. We need to figure out a better design to put everything in. That will be our next challenge along with programing what we want on the raspberry. Dr.Kloth has help us tremulously with the wiring. We hopefully will make a few different kinds of boxes once we get one prototype done correct. We are very excited to get everything working in the next week or two. 

Conversation Box 

We changed our music box to a “conversation box”. This box will have an LD screen connected to a hand crank that power charged the screen to show our conversation questions. The dimensions of the box will have to fit comfortably on the eating tables in the student center. We have raspberry pi that will be connected to our hand crank that will also be connected to our LDS screen. Today we worked on putting the screen into our prototype box. We found a hand crank flightlighn that we will order and take apart. Our next step is programing and connecting the wires before we create a final box that we might make out of plexiglass. Next class we are going to power it with batteries. 

 

 

http://www.alibaba.com/product-detail/Portable-12V-300w-Hand-Crank-Electric_60350586016.html?spm=a2700.7724857.29.55.LEgf6r

Today we took a field trip down the road to the Center of Public Safety to visualize where our project would be places. We decided on putting the music box in the student center and we took measurements of the areas we thought it would be placed. After collecting measurments we spoke to the cordinator and he gave us some great tips and approved of our idea. It was difficult to decide how large we wanted to make the box. At the end of the trip we started to think of ways to decorate the outside of the box to make it look appealing. 

NEW PROJECT 

Two Person Manual Juke Box

 

Our new project is a one handled music box that has a circuit connecting to a MP3 player on the inside, that would create music. We will have a button on the opposite side that will actauly allow the music to start. The handle will chrage the inner batter for the MP3 player and the button will turn the music on and off. We well create holes so the music can come out. 

 

Need:

Speaker

Cheap MP3 player with one song

Handle/crank

Buttons

http://www.amazon.com/AC250V-AC125V-Momentary-Button-Switch/dp/B00D7C443C/ref=sr_1_1?s=industrial&ie=UTF8&qid=1455719147&sr=1-1&keywords=electric+buttons

Battery

Wire

MP3 Player http://www.amazon.com/Malloom-Multi-lingual-Selection-Digital-Support/dp/B01518L1BW/ref=sr_1_22?s=electronics&ie=UTF8&qid=1455718322&sr=1-22&keywords=cheap+mp3+player

Wood to make the box

Hand crank Iphone charger

http://www.amazon.com/Innovative-Digital-Hand-Crank-Emergency-Charger/dp/B0089QB2KY/ref=sr_1_1?s=electronics&ie=UTF8&qid=1455719053&sr=1-1&keywords=iphone+charger+crank

 

We have found some material online and we will continue to research the methods and steps to go about creating our music box. 

 

Today Nellda, Anna, and I joined the Inside- Student center group to brainstorm creative ideas to bring the Police and EMT's together. We thought of mosaic ways that people in the student center could physicaly work together to create one image. So we thought of making a large word puzzle that created words like "Community" "Teamwork" "Love" "Together" ect. For the spaces that do not have a letter we will have pictures made by the lower school. We could also add the police and EMT symbol. Next class we hope to figure out the material we could use to make it work and the possible demensions. 

I have finally printed my mask.

The modern day space-like Icarus​ story and the orchestra that played along with it was nice and creative.